Our Secure Area Sensor can message you when it sensors any unexpected movement without the need of power or a wifi connection. 

Simply turn the device on, pair it with your mobile phone using our free app and stick it to a wall. With less than 10 minutes you have a security system for your shed or garage.

• Our devices send you alerts to your phone using the IoT network
• The IoT network has the same coverage as the 3G/4G network. Once the alarm is trigged you will get a notification on your device notifying you about unwanted visitors.

• No power connection required.
• The device can stay charged for up to one year on 4xAA batteries. You will also receive an alert on your smartphone when the battery is getting low.

STS Remote Alarm Sensor is always ready when it's needed most. You can trust STS for your home or business security.

• The device is aprox 16cm x 16cm (6inches x 6inches) and built with tough, durable and weather resistant materials for indoor and outdoor use.

• The STS free smartphone app is available on Android and iPhone.

• Setup is as easy as entering the serial code into the app and attaching the device to your garage or shed wall.

Simple 10 minute setup.

• When our device detects unexpected movement you will receive an alert via the IoT network - keeping you constantly connected to your asset.
• Optionally, you can set network groups into the app so more people can receive alerts to help with your security.

• Set an alarm schedule from the smartphone app.
• Example: If your remote garage or shed is not accessed from 8am to 3:30pm Monday to Friday. Set this as your alarm schedule and receive notifications only during this time

Receive notifications anytime someone enters your garage or shed.

Our Location Tracker can send you a message and continually track the location of your assets when it unexpectedly starts to move or to know the location of family or employees.

Our devices use the IoT network that has the same network coverage as the 3G/4G network.

In addition, our devices allow for battery life of up to a year. Meaning the STS Location Tracker is always ready when it's needed most.

• Our devices use the IoT network
• This network has the same coverage as the 3G/4G network

• Our devices use both GPS (Satellite) & LBS (mobile towers).
• The device works by using a combination of positioning systems to get the most accurate location. The device uses a combination of GPS (satellite positioning) and LBS positioning (mobile tower positioning). Depending on the best signal available, the device will report the position using either GPS or LBS positioning. A good example is when the device is outdoors and getting GPS signals, the current location shown will have a 5-10meters accuracy. However, when the GPS is weak (indoors, underground, bad weather, etc), mobile towers are used to show the current location in the app. The combination of the two positioning technologies makes the Secure Asset Tracker accurate for all conditions and locations.

STS location tracker is always ready when it's needed most.

• The device is small and discreet to allow you to hide in a compartment that is unlikely to be found.

• You will receive an alert to your paired devices when the sensor triggers any unexpected movement  - keeping you constantly connected to your important assets.
• The smartphone app allows you to schedule when you will receive alerts. I.e. if you own a boat and your family are usually not home from 8am to 4pm - then set this as your alert schedule and be notified only during this time of unexpected movement. 
  

Our Secure Door Sensor (SDS) can message you when it sensors any unexpected access through a door or gate. 

No Wifi or power connection required and less than 10 minute setup time - just pair the SDS device with the app and attach to the back of your door.

All without the need of a WiFi connection - perfect for home, sheds, work-place doors, containers, garages, gates, caravans, storage or power boxes.

• Our device sends you alerts to your phone using the IoT network
• This network has the same coverage as the 3G/4G network – with the difference being that the IoT network is used to send small data packets (like text messages, app alerts & emails) and to reduce battery usage.

• No power connection required.
• Because of the low power used on the IoT network, the device can stay charged for up to one year on batteries. You will also receive an alert on your smartphone when the battery is getting low.

The STS Wireless Door Sensor is always ready when it's needed most.

• The device is approximately the size of a credit card and built with tough, durable and weather resistant materials for indoor and outdoor use.

• The STS free smartphone app is available on Android and iPhone.

• Setup is as easy as entering the serial code into the app and attaching the device ot the back of your door.

Simple 10 minute setup.

• You will receive an alert to your paired devices when someone opens/enters your door or gate  - keeping you constantly connected to your important assets.